Image Data Management; Pair File Processing; Moving Files; Deleting Files - Sony MVS-8000X User Manual

Image Data Management

You can carry out the following operations on the files in
which images are saved.
• Pair file processing (see page 170)
• Moving files (see page 170)
• Deleting files (see page 170)
• Renaming files (see page 171)
Note
When a pair is assigned to the target selection buttons
during playback of a frame memory clip (see page 165),
frame memory operations may not be executed correctly.
Carry out frame memory operations after stopping clip
playback.

Pair File Processing

You can create a pair file from two single files. And you
can split a pair file into two single files.
Couple: Creates a pair file from two single files
Separate: Separates a pair file into two single files.
This section describes the operation using FM1 and FM2
as an example.
Creating a pair file from two single files
Note
Carrying out the following operation automatically
enables pair mode.
1
In the Frame Memory >Still >Recall menu (2511) or
Frame Memory >Clip >Recall menu (2521), recall the
two single files you want to convert to a pair file into
FM1 and FM2.
2
Open the Frame Memory >File >Pair Recombination
menu (2541).
3
Press [Couple].
Splitting a pair file into two single files
Note
Carrying out the following operation automatically
disables pair mode.
1
In the Frame Memory >Still >Recall menu (2511) or
Frame Memory >Clip >Recall menu (2521), recall the
pair file.
2
Select the folder which contains the file to be moved.
3
Open the Frame Memory >File >Pair Recombination
menu (2541).
4
Press [Separate].

Moving Files

1
Open the Frame Memory >File >Move menu (2544).
The status area shows files to be moved in the upper
area, and destination files in the lower area.
2
Select the source folder and file.
3
Select the destination folder.
4
Press [Move].

Deleting Files

1
Open the Frame Memory >File >Delete menu (2545).
In the status area, whether pair mode is enabled or
disabled, all of the saved files appear in thumbnail
view.
2
Select the folder which contains the file to be deleted.
3
Select the file to be deleted.
To select all files, press [All Select], turning it on.
When a clip thumbnail is selected, the still image files
making up the clip are also selected for deletion.
4
Check the contents of the frame memory clip in the
thumbnail display as necessary
No. Parameter Adjustment
3 Viewer
5
Press [Delete].
6
Check the message, then press [Yes].
170
• For a movie, the current frame
position
• For a still image, no effect