M/E-2 bank
4M/E configuration example using 36-button modules for cross-point control block and AUX bus
control block
M/E-1 bank
M/E-3 bank
Cross-point control block (page 29)
PGM/PST (program/preset) bank
Cross-Point Control Block
The cross-point control block is used to select the signals
to be used in the M/E banks and PGM/PST bank.
Note
In the case of the MVS-8000X, only the premium inputs
(inputs to the switcher premium input connectors 1 to 20)
can be selected as key signals on M/E-4.
AUX bus control block
(page 46)
Menu panel (page 49)
Transition control block (page 33)
Flexi Pad control block (page 36)
29
Key control block (page 37)
Device control block
(page 40)
Utility/shotbox control
block (page 45)
Numeric keypad control block (page 43)