Maintenance; Replacing Keytop Labels; Cleaning The Control Panel - Sony MVS-8000X User Manual

Maintenance

Replacing Keytop Labels

A tool for removing keytops is supplied with the control
panel.
You can change the display labels of buttons with different
assigned patterns using the following procedure.
1
Enter a new pattern on a supplied replacement label.
2
Insert the supplied tool into the holes on both sides of
the button, and remove the button.
3
Grasp the notch portion of the inner cap on both sides
using the tool, and twist slightly to pull it up and out.
4
Replace the old label with the new label.
5
Fit the white cap.
6
Reattach the button in its original position.
2

Cleaning the Control Panel

Wipe gently using a soft, dry cloth to remove dirt from the
control panel body, switches, fader lever, and other
components.
Wipe using a cloth moistened with water or lukewarm
water to remove stubborn dirt and stains.
Note
Squeeze the cloth thoroughly before use to ensure that no
water droplets can enter the panel. The unit may become
damaged if water droplets enter the unit.
Do not use cleaning agents, solvents, or detergents.
Vigorous rubbing may scratch the unit.
Cleaning the cross-point Flexi Pad, Flexi Pad
control block, and utility/shotbox control block
If you have any concerns about dust or other matter on the
LCD buttons, contact your Sony service representative.
3
556