Names And Functions Of Parts Of The Control Panel; Control Panel Configuration - Sony MVS-8000X User Manual

Menus and Control Panel

Names and Functions of Parts of the Control Panel

The maximum number of M/E banks supported by the
MVS-8000X/7000X system is given below.
MVS-8000X
Five M/E banks maximum (PGM/PST, M/E-1 to M/E-4)
MVS-7000X
Six M/E banks maximum (PGM/PST, M/E-1 to M/E-5)

Control Panel Configuration

The ICP-X7000 integrated control panel provides flexible
support for a combination of several modules.
The name of each control block and the supported modules
are given below.
Control block
Cross-point control block
AUX bus control block
Transition control block
Flexi Pad control block
Key control block
Numeric keypad control
block
Device control block
(trackball)
Utility/shotbox control block
Menu panel
a) The cross-point control block and AUX bus control block use the same
module. If installed in the same row as the transition control block, it
becomes the cross-point control block. If not installed in the same row as
the transition control block, it becomes the AUX bus control block.
b) There are three types of modules with varying numbers of cross-point
buttons: 36 buttons (MKS-X7017), 28 buttons (MKS-X7018), and 20
buttons (MKS-X7019).
Module
MKS-X7017, MKS-X7018,
a) b)
MKS-X7019
MKS-X7020
MKS-X7024
MKS-X7035
MKS-X7026
MKS-X7031TB
MKS-X7033
MKS-X7011
Chapter
Note
On the MVS-8000X, M/E-5 cannot be used. M/E-5
operation and settings are disabled, even if they appear in
the menu.
For details, see "Disabled Menus on the MVS-8000X"
(page 510).
28
2