Snapshot Status Display - Sony MVS-6520 User Manual

5
To play the clip as soon as it is recalled, press [Auto
Play], turning it on.

Snapshot Status Display

The Snapshot >Snapshot >Attribute menu (6321) displays
the following information.
Region name: The selected region name appears in the
upper part of the list.
Register number
Register name
Write-protected status: When the register is write-
protected, a letter "L" appears.
Empty status: When the register is empty, an "E" (for
"empty") appears.
Attribute settings: The attributes set for a register are
shown by the following character codes.
• When the cross-point hold is set
Attributes set
Displayed
character string
A, B Cross-point hold is set for the A or B
background bus.
1, 2, 3, 4 Cross-point hold is set for one of the
key 1 to 4 buses.
U1 Cross-point hold is set for the utility
bus.
D2 Cross-point hold is set for video bus
selected for 2nd DME channel.
FvFkBvBk Cross-point hold is set for all of the
DME front video bus, DME front key
bus, DME back video bus, and DME
back key bus.
Aux Cross-point hold is set for one of the
AUX buses.
Fm1, Fm2 Cross-point hold is set for one of the
frame memory 1 and 2 buses.
RTR Cross-point hold is set for the Router
• When an effect dissolve is set
region.
Attributes set
Displayed
character string
Duration value The effect dissolve attribute is set,
with the displayed duration.
• When an auto transition is set
Attributes set
Displayed
character string
T Auto transition is set.
• When a GPI output is set
Attributes set
Displayed
character string
Port number GPI output is set for the port of the
displayed number.
• When a clip event is set
Displayed Attributes set
character string
On Clip event is set.
Setting Key Snapshot Attributes
Applying key snapshot attributes
1
Open the Snapshot >Key Snapshot >Attribute menu
(6351).
The status area shows the region names, register
numbers, and whether the registers are locked or not.
2
Press the region display in the upper part of the list,
and in the selection window select the region.
You can select more than one region.
3
Press [OK].
4
Select a register.
5
In the <Recall Mode> group, set the state for save and
recall operations.
XPT: Only the key material selection data is saved or
Modifier: Only the key modifier settings are saved or
recalled.
Transition: Only the independent key transition
settings are saved or recalled.
Creating and Saving a Master
Snapshot
To save a master snapshot, recall the Snapshot >Master
Snapshot >Store menu (6311) and refer to the operation in
"Creating and Saving a Master Timeline with the Menu"
(1 p. 263).
Recalling the Store menu
1
Open the Snapshot >Master Snapshot >Store menu
(6311).
The status area shows the master snapshot register
names, register lock status, register number for each
region, and so on.
2
If required, press the following buttons in the status
area to change the region display.
Snapshot Operations in the Menus
273