Image Data Management; Pair File Processing - Sony MVS-8000SF User Manual

Hide thumbs Also See for MVS-8000SF:

Table of Contents

Image Data Management

You can carry out the following operations on the files in which images are

• The following sections describe the operations available in the MVS-8000A

system and MVS-8000G system.

The MVS-8000 system uses the same menus as those of Version 5.30. For

its operating procedures, see the User's Guide of Version 6.00 or earlier.

• During playback of a frame memory clip of the pair assigned to either of the

target FM selection buttons (see page 331), frame memory operations may

not be performed properly. Carry out frame memory operations after

stopping clip playback.

Pair File Processing

You can create a pair file from two single files. In the reverse direction, you

can split a pair file into two single files.

Couple: You can create a pair file from two single still image files or clip files.

Separate: You can also separate a pair file into two single still image files or

This function is not supported on the MVS-8000.

Creating a pair file from two single files

Carrying out the following operation automatically switches [Pair] to On.

The following description applies to the case of FM1&2, but the procedures are

similar for the other cases.

Image Data Management