Advertisement
DME Wipe Snapshots
You can save a snapshot of a DME wipe pattern together
with all modifiers and pattern limit settings in a register
for recall when required. There are ten DME wipe
snapshot registers on each switcher bank.
For details about editing a DME wipe snapshot register,
see "DME Wipe Snapshot Register Operations"
(page 295).
Saving and recalling a DME wipe snapshot can be
performed using the Flexi Pad control block or the menu.
DME Wipe Snapshot Operations
(Flexi Pad Control Block)
You can configure a DME wipe snapshot using the Flexi
Pad control block of the target switcher bank.
Pressing the [DME WIPE] button in the Flexi Pad control
block switches the memory recall section to DME wipe
snapshot operation mode.
In DME wipe snapshot operation mode, you can save,
recall, and delete DME wipe snapshots in the same way
as for wipe snapshots.
For details about the method of operation, see "Wipe
Snapshot Operations (Flexi Pad Control Block)"
(page 160).
DME Wipe Snapshot Operations
(Menu)
The same memory recall buttons as in the memory recall
section of the Flexi Pad control block are displayed in the
Bus/Transition > DME Wipe > DME Wipe Snapshot
menu on the switcher bank. The settings and display of
the memory recall buttons in the Flexi Pad control block
and in the menu are linked.
In the DME Wipe Snapshot menu, you can save, recall,
and delete DME wipe snapshots in the same way as for
wipe snapshots.
For M/E-1 as an example, the operations are performed in
the Home > M/E-1 > Bus/Transition > DME Wipe >
DME Wipe Snapshot menu (11109.46).
For details about the method of operation, see "Wipe
Snapshot Operations (Menu)" (page 161).
173
Advertisement
Chapters
