Resizer; Two-Dimensional Transforms And Rotation Of Keys - Sony XVS Series User Manual

Resizer

The resizer is a function that applies effects, such as image
reduction/enlargement, movement, rotation, and changes
in aspect ratio, to the generated key.
The following operations are available.
• Two-dimensional transforms of keys (see page 121)
• Key rotation on the x- or y-axis (see page 123)
• Resizer interpolation settings (see page 124)
• Resizer crop/border settings (see page 124)
• Resizer CG border settings (see page 125)
• Resizer effect settings (see page 126)
(wide key border, drop shadow, edge enhance, mosaic,
defocus, mask)
This section describes setting the resizer of key 1 on the M/
E-1 bank as an example.
Notes
• The image of the key manipulated by resizer has a one-
frame delay.
• Some effects of resizer are different from what you
would expect of DME effects.
• There are restrictions on the combined use of resizer
effects themselves and use with DME wipes (see
page 126)
.
• You cannot use DME effects on a key for which the
resizer function is enabled. When one of the three
functions – resizer, DME wipe and DME effects – is
enabled, the other two are disabled.
Two-Dimensional Transforms and
Rotation of Keys
Note
When the screen aspect ratio is 4:3 in HD format, reducing
an image using the resizer reduces the 16:9 image as-is
with the added image portions on the left and right sides.
Use the crop function as required to extract the 4:3 image.
Reducing, enlarging, rotating, and moving
keys (menu)
1
In the M/E-1 >Key1 >Resizer menu (1115), press
[Resizer], turning it on.
2
Set the following parameters.
No. Parameter Adjustment
1 Location X
2 Location Y
3 Size
a)
4 Rotation X
b)
4 Rotation Y
5 Perspective Perspective
a) When [X] is selected in the <Rotation> group.
b) When [Y] is selected in the <Rotation> group.
No. Parameter Adjustment
1 Aspect X
2 Aspect Y
3 Aspect
Ratio
Reducing, enlarging, rotating, and moving
keys (key control block)
For details about buttons and parameters on the key
control block, see "Key Operations (Key Control Block)"
(page 116).
Delegation buttons
Setting buttons
1
Press a delegation button to select the target keyer.
Press the [M/E1] button, turning it on, and press the
[KEY1] button, turning it on.
121
Parameter group [1/2]
Horizontal key movement
Vertical key movement
Key reduction/enlargement
Horizontal key rotation
Vertical key rotation
Parameter group [2/2]
Change aspect ratio horizontally
Change aspect ratio vertically
Change aspect ratio horizontally
and vertically simultaneously
PAGE button
RSZR button
Key control block