Table of Contents
Advertisement
Blink
The blink function provides the following effects.
Key blink: The key is inserted and deleted at the specified frequency.
Edge blink: Key fill and key edge fill are interchanged at the specified
The blink settings are in the Transition menu for each key. (See "Blink
Function" (page 363).)
Key Default
With a simple operation you can return the key adjustment values to their
defaults.
The adjustment values which can be returned to their default values are as
follows.
• Adjustment values for the particular key type (Clip, Gain, Density, Filter,
etc.)
In the case of chroma keying, all adjustment values return to their default
values.
• Key position
• Key inversion
• Clean mode
For details, see "Returning the key adjustment values to their defaults" (page
378).
For the menu operation to return the key adjustment values to their defaults,
see "Returning to default state in function groupings" (page 284).
Key Modify Clear
A simple button operation or a menu operation returns the key settings to the
initial status settings.
For details of the initial status, see "Selecting the State After Powering On
(Start Up Menu)" in Chapter 16 (Volume 2).
For the menu operation to return the key state to that set in initial status, see
"Returning to default state in function groupings" (page 284).
54
Keys
You can also set the frequency and the proportion of the cycle for which
the key is inserted.
frequency. You can specify both the frequency and the proportion of the
cycle for which the interchange occurs.
Advertisement
Table of Contents
