Gete Instruction - Mitsubishi MELSEC-L series Programming Manual

G_GETE
5.2.13

GETE instruction

G(P)_GETE
Structured ladder
G_GETE
EN ENO
Un*
s1
s2
Input argument EN:
Un*:
s1:
s2:
Output argument ENO:
d:
Function
This instruction reads a user frame.
5.2 Serial Communication and Modem Interface Instruction
5-100
5.2.13 GETE instruction
ST
ENO:= (EN, Un*, s1, s2, d);
G_GETE
d
Executing condition
Start I/O number of the module
(00 to FE: Higher two digits when expressing the I/O number in
three digits)
Variable that stores control data
Start number the device that stores the read registration data :ANY16
Execution result
Variable that turns ON upon completion of the instruction
d[1] also turns ON at the time of error completion.
Internal device
Setting
*1
data
Bit Word
−
s1
−
s2
d
P: Executing condition
instructions.
G_GETE
GP_GETE
:Bit
:ANY16
:Array of ANY16 [0..3]
:Bit
:Array of bit [0..1]
J \
R, ZR
U
Bit Word
*1: Local devices and file registers per program cannot be used as setting data.
G_GETE
Sirial Modem
:
indicates any of the following
Zn Constant Others
\G
−
−
−