Mitsubishi MELSEC-L series Programming Manual page 197

Program Example
The following program writes data which are stored in the devices from D750 to D753 of the
station number 2 (host station) to the devices from D300 to D303 of the station number 3 (target
station).
[Structured ladder]
5.4 CC-Link IE Controller Network, MELSECNET/H, and Ethernet Instruction
Process on completion of writing
Process on normal completion
Process on error completion
J_WRITE, G_WRITE
Sets execution/error
completion type
Sets channel used by host station
Sets target station's CPU type
Sets target station network number
Sets target station number
Sets number of resends
Sets monitoring time
Sets data length by the word
Sets write data to D750 to D753
Performs writing
Execution finished
Normal completion
Error completion
Stores error code
5.4.3 WRITE instruction
5
5-151