Errclr Instruction - Mitsubishi MELSEC-L series Programming Manual

ZP_ERRCLR
5.4.20

ERRCLR instruction

ZP_ERRCLR
Structured ladder
ZP_ERRCLR
EN ENO
Un*
s
Input argument EN:
Un*:
s:
Output argument ENO:
d:
Function
This instruction turns OFF the LED on Ethernet module and clears error information stored in the
buffer memory.
5.4 CC-Link IE Controller Network, MELSECNET/H, and Ethernet Instruction
5-212
5.4.20 ERRCLR instruction
ST
ENO:= (EN, Un*, s, d);
ZP_ERRCLR
d
Executing condition
Start I/O number of the module
(00 to FE: Higher two digits when expressing the I/O number in
three digits)
Variable that stores control data
Execution result
Variable that turns ON upon completion of the instruction
d[1] also turns ON at the time of error completion.
Internal device
Setting
*1
data
Bit Word
−
s
d
Executing condition
ZP_ERRCLR
:Bit
:String
:Array of ANY16 [0..7]
:Bit
:Array of bit [0..1]
J \
R, ZR
U
Bit Word
*1: Local devices and file registers per program cannot be used as setting data.
ZP_ERRCLR
E71
:
indicates the following instruction.
Zn Constant Others
\G
−
−