Mitsubishi MELSEC-L series Programming Manual page 201

Program Example
The following program example of the SWRITE instruction is different from that of the WRITE
instruction by assigning the write notification device
[Structured ladder]
(1) Program on the request source (station number 2) of the SWRITE instruction
5.4 CC-Link IE Controller Network, MELSECNET/H, and Ethernet Instruction
Process on completion of writing
Process on normal completion
Process on error completion
J_SWRITE, G_SWRITE
at the end of arguments.
d3
Sets execution/error
completion type
Sets channel used by host station
Sets target station's CPU type
Sets target station network number
Sets target station number
Sets number of resends
Sets monitoring time
Sets data length by the word
Sets write data to D750 to D753
Performs writing
Execution finished
Normal completion
Error completion
Stores error code
5.4.4 SWRITE instruction
5
5-155