Mitsubishi MELSEC-L series Programming Manual page 213

Program Example
The following program reads out data, which is sent from the station number 1 by the SEND
instruction, from the channel 5 of the station number 2 (host station) and stores the data to the
devices from D770 to D773 of the station number 2 (host station) when SB0034 turns ON.
For the SEND instruction, refer to the following section.
Section 5.4.5 SEND instruction
[Structured ladder]
5.4 CC-Link IE Controller Network, MELSECNET/H, and Ethernet Instruction
Process on completion of readout
Process on normal completion
Process on error completion
J_RECV, G_RECV
Sets error
completion type
Sets host station
channel
Sets arrival
monitoring time
Performs readout
Execution finished
Normal completion
Error completion
Stores error code
5.4.6 RECV instruction
5
5-167