Mitsubishi MELSEC-L series Programming Manual page 240

Z_REMTO
[ST]
IF(Var_Flag_Inst=TRUE)THEN
END_IF;
IF((Var_Result[0]=TRUE) AND (Var_Result[1]=FALSE))THEN
END_IF;
IF((Y1029=TRUE) AND (X1029=FALSE))THEN
END_IF;
5.4 CC-Link IE Controller Network, MELSECNET/H, and Ethernet Instruction
5-194
5.4.14 REMTO instruction
MOV(TRUE,H8,D0);
(* A/D Conversion enable/disable setting *)
MOV(TRUE,K50,D2);
(* CH2 time/count averaging setting *)
MOV(TRUE,K1000,D3);
(* CH3 time/count averaging setting *)
MOV(TRUE,H604,D9);
(* Averaging processing specification *)
ZP_REMTO(TRUE,"J1",K1,K1,H2,H0,K10,D0,Var_Result);
(* Writes data to buffer memory *)
SET(TRUE,Y1029);
(* Turns operating condition setting request (Y9) ON *)
RST(TRUE,Y1029);
(* Turns operating condition setting request (Y9) OFF *)