Mitsubishi MELSEC-L series Programming Manual page 128

G_PRR
Control Data
Device
Transmission channel
[0]
s
Transmission result
[1]
s
CR/LF addition specification
[2]
s
Transmission pointer
[3]
s
Number of send data
[4]
s
5.2 Serial Communication and Modem Interface Instruction
5-82
5.2.9 PRR instruction
Item
Set the transmission channel.
1: Channel 1 (CH1 side)
2: Channel 2 (CH2 side)
The instruction completion status is stored.
0
Other than 0
Specify whether to add CR/LF codes to the send data.
0: CR/LF not added
1: CR/LF added
Specify the position in the user frame specification
area for transmission from where the frame number
data are to be sent.
Set the number of user frames to be sent.
Setting data
: Normal completion
: Error completion (error code)
Setting range Setting side
1, 2 User
System
–
0, 1 User
1 to 100 User
1 to 100 User