Mitsubishi MELSEC-L series Programming Manual page 181

G_RLPASET
[Structured ladder]
Reads SB0040 to SB01FF
Reads SW0040 to SW01FF
Parameter setting command
Clears completion status
Sets all of setting flags to Valid
Sets number of connected modules
Sets number of retries
Sets number of automatic return
modules
Sets operation specification when
CPU is down to stop
Sets scan mode specification to
asynchronous
Set delay time specification
First module: local station,
5
1-station occupy, station number 1
Second module: Remote I/O station,
1-station occupy, station number 2
Third module: Remote I/O station,
1-station occupy, station number 3
Reserved station specification:
station number 3
Error invalid station specification:
station number 2
First module: local station,
send buffer 100 words
Receive buffer 100 words
Auto-refresh buffer 0 word
Performs parameter setting and
data link start
Turns parameter setting
command OFF
Refresh command
Control program start command
Process on error completion
5.3 CC-Link Instruction
5-135
5.3.7 RLPASET instruction