Mitsubishi MELSEC-L series Programming Manual page 162

Hide thumbs Also See for MELSEC-L series:

Table of Contents

Program Example

The following program stores 10-word data, which are stored in the devices starting from D0, to

the devices starting from D1000 of the number 1 local station connected to the master module

mounted on the I/O numbers from X/Y40 to X/Y5F.

(When the refresh device of the link special register (SW) is set to SW0.)

[Structured ladder]

5.3 CC-Link Instruction

5.3.2 RIWT instruction

Process on completion of receiving

Process on normal completion

Process on error completion

Sets station number

Sets access code

and attribute code

Sets device number

Sets number of

write points

Performs writing

Turns execution

Turns execution

Melsec-q series