Mitsubishi MELSEC-L series Programming Manual page 217

[ST]
IF (LDP(TRUE,SM400)=TRUE) THEN
MOV(TRUE,H0,Var_ControlData[0]);
MOV(TRUE,K5,Var_ControlData[2]);
Z_RECVS(TRUE,"U0",Var_ControlData,D770,Var_Dummy);
(* Process on completion of readout *)
END_IF;
5.4 CC-Link IE Controller Network, MELSECNET/H, and Ethernet Instruction
(* Sets execution/error completion type *)
(* Sets host station channel *)
(* Performs readout *)
5.4.7 RECVS instruction
Z_RECVS
5
5-171