Mitsubishi MELSEC-L series Programming Manual page 196

J_WRITE, G_WRITE
Device Item
Write data length
[9]
s1
(Reserved)
[10]
s1
*3
[11] Clock set flag
s1
[12]
s1
Clock data at the time of
to
*3
error completion
[15]
s1
Error-detected network No.
[16]
s1
*3
Error-detected station No.
[17]
s1
*3
*1 :
*2 :
*3 :
5.4 CC-Link IE Controller Network, MELSECNET/H, and Ethernet Instruction
5-150
5.4.3 WRITE instruction
Specify the number of write data.
Description
Ethernet
MELSECNET/H
Writing to the QCPU
CC-Link IE
controller network
Valid/invalid status of the data in the area starting from
0: Invalid
1: Valid
Clock data at the time of error completion are stored in BCD format.
b15 to
[12 ]
Month (01 to 12
s1 H
[13 ] Hour (00 to 23
s1
H H
[14 ] Second (00 to 59
s1 H
[15 ]
Year (00 to 99 ) First two digits
s1 H H
Network number of the station where an error was detected is stored.
(However, when an error was detected at the host station, the network
number is not stored.)
1 to 239: Network number
Number of the station where an error was detected is stored.
(However, when an error was detected at the host station, the network
number is not stored.)
Ethernet
1 to 64
MELSECNET/H
CC-Link IE controller
1 to 120
network
Specification is possible when the host station is a network module or Ethernet module of function
version D or later.
(Specification is not possible for other modules. An access is always made to the target station CPU.)
Specification is possible when the versions of the QCPU and the network module on the host station and
the target station are as indicated below.
(Specification is not possible for other modules. An access is always made to the target station CPU.)
• Network module: The first five digits of the serial number are '06092' or higher.
• QCPU: The first five digits of the serial number are '06092' or higher.
Data are stored only when 1 is set in bit 7 of Error completion type (
Setting data
Setting value
1 to 960
(word)
–
[12] is stored.
s1
b8 b7 to b0
Year (00 to 99 ) Last two digits
)
H H
H
) Day (01 to 31 )
H H
)
Minute (00 to 59 )
H H H
Day of week (00 to 06 )
H H
00 (Sun.) to 06 (Sat.)
H H
Setting range
Setting side
1 to 960 User
– –
System
–
System
–
System
–
System
–
[0]).
s1
*1