Mitsubishi MELSEC-L series Programming Manual page 20

Function/module for explaining an
Built-in I/O function
Data logging function
1.3 Explanation Contents in This Manual
1-6
instruction
• Starts positioning of the specified axis.
• Starts OPR of the specified axis.
• Starts JOG operation of the specified axis.
Positioning function • Restores the absolute position of the specified axis.
• Stops the operating axis.
• Changes the speed and the target position of the specified
• Updates the current value of the specified CH.
• Sets a ring counter lower limit value and a ring counter
• Sets a preset value/latch counter value/sampling counter
Counter function
• Sets the coincidence output No. n point.
• Measures the frequency/rotation speed.
• Stores the measured pulse value.
• Outputs the PWM wave form.
• Generates a trigger on the data logging of the specified
• Resets the LOGTRG instruction of the specified data
• Precautions on using instructions
For details of the specifications, functions, and operating timing of each
instruction, refer to the related manuals of each module.
'MANUALS'
Processing performed by the instruction
axis.
upper limit value.
value.
data logging configuration number.
logging configuration number.
Reference
Capter 8
Capter 9