Final Drive Gear; Ring Gear Removal - Honda CX650C 1983 Shop Manual

Inspect the universal joint bearings for excessive
play or damage. Replace the universal joint if
necessary.
Apply Multipurpose NLGI No. 2 (MoS2 additive)
grease t o the splines and install the universal joint.
MULTIPURPOSE NLGl No. 2
(MO& additive) GREASE
FINAL DRIVE GEAR
RING GEAR REMOVAL
Remove the distance collar.
Remove the dust guard plate bolts and the
6
guard plate by turning i t clockwise.
DUST
GUARD
PLATE
Remove the eight case cover bolts and cover. If the
ring gear stays in the cover, do the following:
Place the cover in a press with the ring gear down.
Make sure the cover is secrely supported. Press the
ring gear out of the cover with driver
07749-0010000 and attachment, 32
X
35 mm
07746-001 01 00.
DISTANCE COLLAR
just
Dare of Issue: December, 1982
O
HONDA MOTOR CO., LTD.