Final Drive Oil - Honda Gold Wing 2021 Manual

Final Drive Oil

Checking the Final Drive Oil
1. Hold the vehicle upright on firm level
ground.
2. Remove the oil fill hole cap and O-ring.
3. Check the oil level. It should be flush
with the lower edge of the oil fill hole.
Oil fill hole cap
Lower edge
Adding Final Drive Oil
If the final drive oil level is low, check for oil
leaks. Add the recommended final drive oil
( P. 163) until it reaches the lower edge of
2
the opening.
1. Pour the final drive oil into the oil fill
hole until it reaches the lower edge of
the opening.
Do not over fill above the lower edge
u
of oil fill hole.
Make sure no foreign objects enter
u
the oil fill hole.
Wipe up any spills immediately.
u
2. Install a new O-ring onto the oil fill hole
cap. Tighten the oil fill hole cap.
Torque: 5.9 lbf·ft (8 N·m, 0.8 kgf·m)
O-ring
173