Nuts, Bolts, Fasteners; Wheels; Steering Head Bearings - Honda CX650C 1983 Shop Manual

NUTS, BOLTS, FASTENERS
Check that all chassis nuts and bolts are tightened to
correct torque values (page 1 -.S).
Check all cotter pins and safety clips.
WHEELS
NOTE
Tire pressures should be checked when tires
are COLD.
Check the tires for cuts, imbedded nails, or other
sharp objects.
RECOMMENDED T I R E PRESSURE AND TIRE
Si ZE:
-
- .
........,l
Front Rear
Cold
tire
pres-
sures
k P a
(kglcm
psi
Tire size
. . . - p
(200 I bs)
(200 I bs)
load to
vehicle
capacity
Check the front and rear wheels for trueness. (page
13-12, 14-4)
Measure the tread depth a t the center of the tires.
Replace the tires if the tread depth reaches the
followins limits.
Minimum tread depth:
Front : 1.5 mm
( ? / l 6 in)
Rear : 2.0 m m (3/32
i n )
STEERING HEAD BEARINGS
NOTE
Check that the control cables do not interfere
with handlebar rotation.
Raise the front wheel off the ground and check that
the handlebar rotates freely.
I f the handlebar moves unevenly, binds, or has
vertical movement, adjust the steering head bearing
by turning the steering head adjusting nut (page
Date of Issue: December.,
1982
O HONDA MOTOR
Co.,
LTD.