Rocker Arm Installation - Honda CX650C 1983 Shop Manual

ROCKER ARM SHAFT INSPECTION
Measure each rocker arm shaft
O.B.
SERVICE L1M1T:
"1.966 mm (6.5510 in)
inspect the shaft for wear or damage.
Calculate the clearance of the shaft and the rocker
arm.
SERVICE LIMIT: 0.080 mm (0.6031 in)
ROCKER ARM INSTALLATION
Install the rocker arms with the offset toward the
inside and facing each other a s shown.
SPRINGS
Install the rocker arms and thrust springs in the
cylinder block, and then insert the rocker arm
s hafts.
engine oil before installation.
threaded end facing the rear (cam sprocket
side).
Install the thrust springs on the inside of
the rocker arms.
ROCKER ARM SHAFT R O C K E ~ A R M S
Date of Issue: Decern ber,
1982
O
HONDA MOTOR
GO.,
LTD.