Pinion Joint Installation - Honda CX650C 1983 Shop Manual

PINION JOINT I NS~TALLATION
install the appropriate pinion retainer bolt lock tab.
NOTE
I
There are two types of loclc tabs a s shown.
1
- - p - -
Apply gear oil t o the oil seal lip contact surface of
the pinion joint and install the pinion joint.
Install the pinion joint holder tool and tighten the
pinion nut.
TORQUE: ?68-120N.m
(26.8-12.0
kg-m, 92-89
fi-lb)
Remove the pinion joint holder tool.
LOCK TABS
PINION JOINT HOLDER
Make sure that the gear assembly rotates smoothly
without binding by turning the pinion joint.
GEAR ASSEMBLY PRELQAD:
0.2-0.4 Fd-m (2-4 kg-cm, 1.2-2.4 in-lb)
Date of Issue: December, f 982
O
HONDA MOTOR
CO.,
LTD.