Honda CX650C 1983 Shop Manual page 206

PISTON
Insert the rebound spring and piston into the fork
tube.
Place the oil lock piece on the end of the piston and
insert the fork tube into the slider.
OIL LOCK
PIE'GE
HEX WRENCH, 6 mm 07917-3230000 OR EQUIVALENT
Place the fork slider in a vise with soft jaws or a
shop towel. Apply a locking agent to the socket bolt
and thread
it
into the piston. Tighten i t with a 6
mm hex wrench.
NOTE
Temporarily install the fork spring and fork
cap bolt to tighten the socket bolt.
TORQUE: 15-25 N e m
(1.5-2.5 k g m , 11-78 ft-lb)
FORK SEAL DRIVER 07947-4630100
Place the slider bushing over the fork tube and rest
it on the slider. Put the back-up ring and an old
bushing or equivalent tool on top.
Drive the bushing into place with the seal driver and
remove the old bushing or equivalent tool.
Coat
a
new oil seal with ATF and install it with the
seal markings facing up. Drive the seal in with the
seal driver.
Date of Issue: December, 198%
O HONDA MOTOR CO.,
LTD.