Final Drive Oil - Honda Shadow Aero VT750C 2018 Owner's Manual

Final Drive Oil

Checking the Final Drive Oil
Place your motorcycle on the side stand
1.
on a level surface.
Remove the oil fill hole cap and O-ring.
2.
Check the oil level. It should be flush with
3.
the lower edge of the oil fill hole.
Oil fill
O-ring
hole cap
Adding Final Drive Oil
If the final drive oil level is low, check for oil
leaks. Add the recommended final drive oil
(
2
the opening.
1.
Lower edge
2.
Torque: 9 lbf·ft (12 N·m, 1.2 kgf·m)
P. 44) until it reaches the lower edge of
Pour the final drive oil into the oil fill hole
until it reaches the lower edge of the
opening.
Do not over fill above the lower edge
u
of oil fill hole.
Make sure no foreign objects enter the
u
oil fill hole.
Wipe up any spills immediately.
u
Install a new O-ring onto the oil fill hole
cap. Tighten the oil fill hole cap.
63