Camshaft Removal; Camshaft Inspection - Honda CX650C 1983 Shop Manual

Remove the cylinder heads (Page 6-31.
Temporarily install the cam sprocket. Hold the cam
sprocket with
a
Gear Holder to prevent it from
turning.
Loosen the 27 mm nut and remove the cam
sprocket and cam sprocket boss.
Remove the camshaft holder and the camshaft from
the front.
CAMSHAFT l NSPECTION
Measure the O.D. of each camshaft bearing johrnal.
SERVICE LIMITS:
FRONT:
21.910 mm (0.8526
in)
REAR: 25.910 mm (1.0261
in)
Calculate the journal and bearing clearance.
SERVICE LIMIT: 0.260
mm
(6.0'1102
in)
Inspect the worm gear for wear or damage.
Date of Issue: December,
1982
O
MONDA MOTOR CO., LTD.
GEAR HOLDER 07924-MC70002 or
04924--MC70000 or
07924-41 50000
LOCK NUT SOCKET WRENCH 17
X
27 mm 07907-MC70000 or
07907-4150000 OR COMMERCIALLY AVAILABLE I N U.S.A.
CAMSHAFT HOLDER CAVSHAFI
FRONT R E A R
WORM
GEAR