Honda CX650C 1983 Shop Manual page 244

HYDRAULIC BRAKE
Measure the master piston
0.D.
SERVICE LIMIT: '93.945 mm (8.549 in)
Check the primary and secondary cups for damage
before assembly.
I
Handle the master cylinder piston, cylinder
I
Assemble the master cylinder. Coat all parts with
clean brake fluid before assembly. Install the spring
and primary cup together.
Dip the piston cup in brake fluid before assembly.
When instaEli~zg the cups, do nor allow the lips
to turn inside out. Be certain the circlip is
seated firmly in the groove.
--- - -
- - p -
BRAKE FLUID
g
c ; -
---
&
4
FRONT
BRAKE
n
SWITCFI
Install the piston clip and boot.
PUNCH M A R K
Race the master cylinder on the handlebar and
install the holder with the two mounting bolts.
Align the end of the holder with the punch mark on
the handlebar.
Tighten the top bolt first. Install the oil hose with
the bolt and its two sealing washers.
Install the brake lever.
Fill the reservoir to the upper level and bleed the
brake system according to page 15-4.
LIGHT
Date of
Issue: December, 1982
O
HONDA MOTOR CO., LTD.