Cam Chain Removal - Honda CX650C 1983 Shop Manual

CAM CHAIN REMOVAL
Remove the engine (Page 5 2 ) .
Remove the engine rear cover (Section 8).
Remove the starter reduction gear, flywheel and
starter driven gear (Section 8).
Remove the chain guide set plate bolts.
Remove the chain guide set plate.
Compress the push rod while pressing in the steel
ball with a flat-end screwdriver. Hold the push rod
by inserting the retaining pin through the push rod
to the tensioner base.
Remove the cam chain tensioner
s e t
bolt and
tensioner.
CAUTION:
- p p - -
set bolt has a special thread pitch.
use any other bolt in its place.
SET" PLATE
SET BOLT CAM CHAIN TENSIONER
Remove the chain tensioner slipper.
Remove the cam chain guide.
CAM CHAIN ~ U I B E CHAIN TENSIONER SLIPPER PUSH ROD
BOWEL BOLTS
Remove
cket and
the
cam
cam sprocket dowel
chain.
bolts, cam spro-
CAM SPROCKET CAM CHAIN
Date of Issue: December,
1982
O
HONDA MOPOR
CO.,
LTD.