Honda CX650C 1983 Shop Manual page 85

HONDA
CX650C
CYLINDER
- .
HEADlVALVE
ORIFICE AND CYLINDER
0 - R I N G GASKET
Install the O-rings and cylinder base dowel pins.
Install a new head gasket and make sure that the oil
orifices are not obstructed by the gaskets.
Remove the timing inspection cap.
Make sure the piston is at I.D.C. on the compres-
sion stroke; turn the crankshaft, when both push
rods are down and the timing marks align, the
piston is on compression.
for the right cylinder.
Align the index mark with the "TL" mark
for the left cylinder.
DOWEL PINS
PUSH RODS
Install the cylinder head.
install the cylinder head dowel. pins.
Apply Multipurpose N LGl No. 2 (MoS2 additive)
Grease to the ends of each push rod.
Install the push rods into the rocker arm retainers.
DOWEL +IRIS
PUSH RODS
lnstall the rocker arm holder assembly.
Align the rocker arms with the push rods.
ROCKER ARM HOLDER
Bare
of Issue: December, 1982
O
HONDA MOTOR CO., LTD.