Fuel Lines; Fuel Strainer; Throttle Operation - Honda CX650C 1983 Shop Manual

MAINTENANCE
- - - - p -
-
FUEL LINES
Make sure that the fuel lines and connections are
not deteriorated, damaged or leaking. Replace any
parts which show signs of deterioration, damage or
leakage.
FUEL STRAINER
Turn the fuel valve OFF.
Remove the fuel cup, O-ring and filter screen,
draining the gasoline into a suitable container.
- -
- M -
-- ---
- 7
i s flarritnalrle arzd is explosive under
l
certain cotrdibions. Do not srrioke or allorv
frames or spnr!cs necsr the eqrriprnent ivhile
clraining firel.
-
Wash the fuel cup and filter screen in clean
non-flammable or high flash point solvent.
Reinstall the filter screen, aligning the index marks
on the fuel valve body and the filter screen. Install a
new 0-ring into the fuel valve body.
Reinstall the fuel cup, making sure the new 0-ring is
in place. Finger-tighten the cup first, then torque i t
t o specification.
TORQUE: 3-5 N'ETI
(0.3-0.5 kg-m, 2-4 ft-lb)
After installing, turn the fuel valve
ON
and check
that there are no fuel leaks.
THROTTLE OPERATION
NOTE
The accelerator pump may flood the engine
during this inspection.
Check for smooth throttle grip rotation from fully
closed to fully open positions at all steering posi-
tions. Lubricate the cables i f throttle grip operation
is not srnooti?.
Check that there i s no deterioration, damage, or
kinks in the throttle cables, and that the throttle
grip free play is 2-6 mm (1/8-114 in) on the outer
edge of the throttle grip flange.
Check that the throttle grip au"rmatica1ly returns
from fully open to fully closed position when
released. Adjust or replace, i f necessary.
FUEL LINE
FUEL. V A L V E
BODY
INDEX MARKS
FILTER
SCREEN
FUEL. CUP
Date of isside: December, 1982
G3 WONDA MOTOR
Co.,
LTD.