Axle; Wheel Bearings; Wheel Tim Runout - Honda CX650C 1983 Shop Manual

HONDA
REAR WHEEL/S$dSPENSION/BRAKE
- p p - -
- - - -
---
CX65OC
.
P
INSPECTION
* AXLE
Set the axle in V blocks and read the axle runout
with a dial indicator. The actual axle runout is 112
of the total indicator reading.
SERVICE LIMIT: 0.2 mm (0.03 in)
WHEEL BEARINGS
Place the wheel in a truing stand and check the
wheel bearing play by rotating the wheel by hand.
Replace the bearings with new ones i f they are noisy
or have excessive play.
WHEEL RIM WklN0bl-T
Check the rim for runout by placing the wheel in a
truing stand. Spin the wheel slowly, and read the
runout using a dial indicator.
SERVICE LIMITS:
RADIAL RUNOUT:
2.0
m m (0.08 in)
AXIAL RUNOUT: 2.0 m m (0.08 in)
The wheel cannot be serviced and must be replaced
if the above limits are exceeded.
Bate
of Issue: December, 1982
O HONDA MOTOR
CO.,
LTD.