Accelerator Pump Adjustmemt; Carburetor Installation - Honda CX650C 1983 Shop Manual

HONDA
FUEL SYSTEM
CX65OC
ACCELERATOR PUMP ADlUSTMEMT
Loosen the throttle stop screw, so the throttle valve
i s closed.
Measure the clearance between the accelerator
pump rod and the choke link arm with the throttle
valve closed.
CLEARANCE: 69.1--9.3 mm (0.004-0.1112 in)
Adjust by bending the choke link arm.
Measure the clearance between the choke link arm
and stopper on the carburetor.
CLEARANCE: 3.1-3.3 mm (8.12-0.13 in)
Adjust by bending the choke link arm.
CARBURETOR INSTALLATION
Install the carburetors in the reverse order of
removal.
Tighten the intake manifold bolts and carburetor
bands cecurely.
NOTE
/
Check the throttle and choke valve operation
1
1
before installation.
After installation, perform the following adjust-
ments.
e
Throttle grip free play (Page 33-41.
e
Carburetor synchronization (Page 3-91.
oe
Idle speed adjustment (Page 3-10).
e
Pilot screw setting and adjustment (Page 4-13).
STOP SCREW
l
CARBURETOR BAND SCREW
INTAKE MANIFOLD BOLT
Bate of
Issue:
December,
1982
O
HONDA MOTOR
GO.,
LTD.