Final Gear Oil Check/Replacement; Oil Level Check; Oil Replacement; Control Cable Lubrication - Honda CX650C 1983 Shop Manual

LUBRICATION
FINAL GEAR 0 1 1 CHECKIREPLAGEMENT
OIL L E V f L CHECK
Place the motorcycle on
i t s
center stand.
Remove the oil filler cap.
Check that the final gear case
is
filled up to the
lower edge of the oil filler cap hole.
O I L T I L L E R
CAP
If the level i s low, check for leaks. Pour Fresh
oil through the oil filter opening until i t
1
bathes
the lower edge of the opening.
-
i
DRAIN 80L7
OIL REPLACEMENT
Remove the oil filler cap.
Remove the drain bolt
" r
drain ail oil from the final
gear case.
Reinstall the drain bolt securely.
Fill the gear case with the recommended oil up to
the correct level.
Olb CAPACITY: 960-"18
CC
[5.4-6."1~)
RECOMMENDED Olb: HYPOID G E A R Qlb
SAE 90 (Above 5 O ~ / 4 1 ~ ~ 1
SAE 80 (Betaw
5"~/sblO
F)
Oli- LEVEL
CONTROL CW BLE kUBDlCATlOM
Periodically, disconnect the throttle and clutch
cables at their upper ends. Phoro~tghly lubricate "re
cables and their pivot points with a commercially
available cable lubricant.
Bare
of issue:
December, l982
Cc;, l4ONDR MOTOR
CC).,
LTD.