Piston Removal; Piston Inspection - Honda CX650C 1983 Shop Manual

CRAN KSHAFT/PBSTON
PISTON REMOVAL
Remove the piston pin clips and the pin.
NOTE
Mark the pins to indicate the piston they were
removed from.
PISTON INSPECTION
Measure the ring-to-groove clearance.
SERVICE
LIMIT:
(I($P/SECOND): 6.10 mm (0.804 in)
Remove the piston rings.
NOTE
Mark the rings so they can be reinstalled on
the piston they were removed from.
Clean and inspect the piston crown.
Inspect the piston for damage and cracks; check the
ring grooves for excessive wear.
Insert each piston ring into the cylinder and
measure the ring end gap.
SERVICE LIMIT:
TOPISECOND: 0.60 mm (0.024
in)
OIL (SIDE RAIL): 1.10 mm (0.043 in)
Date
of Issue: December,
1982
C c )
HONDA MOTOR
CO.,
LTD.