Honda CX650C 1983 Shop Manual page 132

COOLlNG SYSTEM
To install the mechanical seal using tool GN-AH-
665-41 5 (U.S.A. ONLY):
Remove the oil seal from the rear cover.
Slide the mechanical seal onto the bolt and into the
installer cup of the special tool.
Apply
a
thin coat of sealant to the outer surface of
the metal casing of the seal.
NOTE
Some mechanical seals may be precoated with
sealant from the factory.
Position the seal and tool in the rear cover.
Install the guide plate and nut onto the bolt from
the back side of the cover. Torque the nut to
42.6-44.8 $4-m (380-400 lb-in.) (31.6-33.3 Ib-ft).
Remove the tool and inspect the installation.
MECHANICAL INSIALL.ER
SEAL CUP
ENGINE
MECHANICAL SEAL INSTALLER
GN-AH-065-415
Date of Issue: December, 1982
C 3 HQNBA MOTOR CO., LTD.