Gear Tooth Contact Pattern Check - Honda CX650C 1983 Shop Manual

Clean all sealing material off the mating surfaces of
the gear case and cover.
.
Be careful not to damage the mating
surfaces.
Apply liquid sealant t o the mating surface of the
gear case cover.
PRUSSIAN BLUE WAVE WASHER
GEAR TOOTH CONTACT PATTERN
CI-JECK
Apply a thin coat of Prussian Blue t o the pinion
gear teeth for a gear tooth contact pattern check.
Place the wave washer and ring gear into the gear
case.
Apply gear oil t o the lip of the oil seal on the gear
case cover and install the gear case cover.
10 mm BOLTS
8 mm B 0 LTS
Tighten all the cover bolts in 2-3 steps until the
cover evenly touches the gear case, then tighten the
8 mm bolts t o the specified torque in a crisscross
pattern in two or more steps.
TORQUE: 23---28 R1-m
(2.3-2.8 kg-m, 19-28 ft-lb)
Then tighten the 10 mm bolts.
TORQUE: 45-58
Nem
(4.5-5.0
kg-m, 33-36 ft-lb)
Bate of Issue: December, 1982
O
HONDA MOTOR CO., LTD.