Coolant Replacement - Honda CX650C 1983 Shop Manual

cx&soc
COOLlNG SYSTEM
COOLANT REPLACEMENT
The engine must be cool befire serviciplg. the
caldit~g may result.
Remove the radiator cap.
2
Remove the radiator cover by removing the screws
on the side of the cover.
Remove the radiator drain plug, and drain the
coolant.
To drian coolant from the cylinders, remove the
cylinder drain plugs.
Replace the cylinder and radiator drain bolts.
CAUTION
RADIATOR CAP
/
Do not overtighten the radiator drain plug.
1
RADIATOR DRAIN PLUG CYLINDER DRAIN
PLUG
RESERVE TANK
Fill the system with a 50-50 mixture of distilled
water and ethylene glycol.
Bleed air from the radiator.
Start the engine and run until there are no air
bubbles in the coolant, and the level stabilizes.
D
Stop the engine and add coolant up to the proper
level, if necessary.
e
Reinstall the radiator cap.
e
Check the level of coolant in the reserve tank and
fill to the correct level i f i t is low.
Bate of
Issue:
December,
1982
O
HONDA MOTOR
CO.,
LTD.