Final Drive Oil - Honda Shadow Aero VT750C 2022 Owner's Manual

Final Drive Oil

Checking the Final Drive Oil
Place your vehicle on the side stand on a
1.
level surface.
Remove the oil fill hole cap and O-ring.
2.
Check the oil level. It should be flush with
3.
the lower edge of the oil fill hole.
Oil fill
hole cap
58
Lower edge
O-ring
Adding Final Drive Oil
If the final drive oil level is low, check for oil
leaks. Add the recommended final drive oil
( P. 45) until it reaches the lower edge of
2
the opening.
Pour the final drive oil into the oil fill hole
1.
until it reaches the lower edge of the
opening.
Do not over fill above the lower edge
u
of oil fill hole.
Make sure no foreign objects enter the
u
oil fill hole.
Wipe up any spills immediately.
u
Install a new O-ring onto the oil fill hole
2.
cap. Tighten the oil fill hole cap.
Torque: 9 lbf·ft (12 N·m, 1.2 kgf·m)