Pivot Bearing Replacement - Honda CX650C 1983 Shop Manual

REAR WHEELISUSPENSIONIBRAKE
PIVOT BEARING REPLACEMENT
Remove the dust seals and pivot baring inner races.
Punch or drill a 13 mm
(1/2
in) hole into each
grease retainer.
Remove the attachment from the special tool,
67936-3710500.
Slide the shaft through the hole
and install a 29
mm
(8.D.)
washer or equivalent and
attachment onto the shaft.
Install the slide hammer and handle and remove the
race.
Repeat for the other side.
Install new grease retainer plates and drive new
bearing outer races into the swing arm pivot.
DUST SEAL PIVOT BEARING INNER RACE
REMOVER WEIGHT
BEAW1NG REMOVER 07936-3710200 or
07936-41 50000
( 4
07741 -001 0201
(Not available rn
U.S.A.)
or 07936-371 0500
\
D R I V E R ATTACHMENT, 32x35
mm
B a t e of Issue: December,
2 982
O I4ONDA MOTOR
CO.,
LTD.