Crankshaft Installation - Honda CX650C 1983 Shop Manual

GRAN KSHAF"T/PiSTON
CRAW KSHAFT IMSTAbbATlOM
Lubricate the journal bearing of the engine case
with Multipurpose
NLGI
No. 2 (MoS2 additive)
Grease.
7"l-l RUST WASI-IER CUT-OUTS
Install the thrust washer on the engine case bearing
with the oil grooves facing the rear and cut-outs
aligned with the lugs on the engine case.
MULTIPURPOSE NLGl 8 1 1 - GROOVE
No, 2 (MoS2 ADDITIVE)
Wrap the splines of the crankshaft and timing gear
area with vinyl tape to prevent damage to the main
journal bearings.
Install the crankshaft.
NOTE
Make sure that the thrust washer is not
displaced.
.
l
TAPE
THRUST WASHER
Remove the vinyl tape from the splines.
Install the thrust washer on the engine case bearing
with the oil grooves facing the front and cut-outs
aligned with the lugs on the engine case.
Dare
of Issue:
December,
'l 982
O
HONDA MOTOR
CO.,
LTD.