Honda CX650C 1983 Shop Manual page 96

CLU"$C/OOBB PUMP
Install the clutch center holder onto the clutch
pressure plate with four 6mm bolts. Finger tighten
the bolts.
Turn the clutch assembly clockwise to align the
teeth on the sub-gear with the primary drive gear and
push the clutch assembly in.
Remove the clutch center holder.
3-LOCK WASHER
Install the lock washer and lock nut.
lnstall the lock washer with the mark
"OUT SIDE" facing out.
/
e
Install the lock nut with the flat end facing
1
out.
LOCK N U T
LOCK
N U T
WRENCH.
26 x 30 mm 0771 6-Ob20203
EXTENSION
Attach the Clutch Center Holder to the pressure
plate boss t o prevent it from turning.
Tighten the lock nut.
f ORQU E: 80--100 N-m
(8.0-10.0 kg-m, 58-72 fl-lbl
C L U T C H CENTER HOLDER 07923-4150000
OR E a U I V A L E N T
Bate of Issue: December, '1982
O HONDA MOTOR CO.,
LTD.