Cylinder Head Assembly - Honda CX650C 1983 Shop Manual

CYLINDER HEAD/VAL.VE
Refinish the seat to specifications, using a 45 degree
finisher cutter.
After cutting the seat, apply lapping compound to
the valve face, and lap the valve using light pressure.
After lapping, wash all residual compound off the
cylinder head and valve.
NOTE
Do not allow lapping compound to enter the
guides.
CYLINDER HEAD ASSEMBLY
Install the valve stem seals and spring seats.
Lubricate the valve stems with oil, and insert the
valves into the guides.
install the valve springs and retainers.
SPRING SEAT
wound coils facing the head.
Replace the stem seals with new ones
whenever disassembled.
STEM
SEA
VALVE SPRINGS RETAINER
COTTERS
VALVE SPRING COMPRESSOR 07757-0010000
Install the valve cotters.
CAUTION
To prevent loss of tension, do not compress
the valve spring more than necessary.
Date of Issue: December,
1982
O
HONDA MOTOR
CO.,
LTD.