Honda CX650C 1983 Shop Manual page 145

TENSIONER SET BOLT
Tighten the cam chain tensioner setbolt.
TORQUE: 18-25 N - m
(4.8-2.5 kg-m, 13-18 ft-lb)
Be sure to use the correct set bolt. Faillire to
1
use the special bolt w i l l ruin the threud hole in
the engine case.
Removethe pin from the hole in the push rod, the
lensioner will automatically give tension to the cam
chain. Make sure the push rod moves smoothly by
pressing the steel ball in.
CAM CHAIN SET PLATE
lnstall the cam chain
s e t
plate and tighten the bolts.
ENGINE OIL
Pour about '10 cc of engine oil into the oil pockets
of the cylinder block.
Install the flywheel (Page 8-9) and the cylinder
head (Page 6-14).
Adjust the valve clearance (Page 3-8).
lnstall the engine (See section 5 ) .
Add the specified amount of engine oil (Section 2).
Date of issue: December, 1982
O
HONBA MOTOR
CO.,
LTD.