Honda CX650C 1983 Shop Manual page 154

Thread the clutch lock nut onto the end of the
mainshaft to prevent damage to the end.
Remove the mainshaft by lightly tapping on the end
with a soft hammer.
Remove the gears by prying off the snap ring.
Remove the mainshaft bearing with a bearing puller
if necessary.
NOTE
The bearing should be replaced with
a
new
one if it is removed from the mainshaft.
B E A R I N G REMOVER H A N D L E B E A R I N G REMOVER WEIGHT
Inspect each holder bearing for wear or damage.
They should rotate smoothly and
be
free of play.
Remove the bearing from the transmission holder.
07936-371 0600 MAINSHAFT
Remove the countershaft bearing from the engine
case.
Remove the mainshaft bearing and oil guide plate
from the engine case with the special tools.
NOTE
Bearings should be replaced with new ones if
they are removed from the case.
TOOLS:
Bearing Remover, 20mm
07936--3710600
Bearing Remover Handle
07936--3910100
Bearing Remover Weight
07936-371 8200
Date of Issue: December, 198%
O
HONDA MOTOR
CO.,
LTD.