Separate the carburetors.
C%IUTlOl\li
Separate the carbtlretors horizon fully to pre-
vent damage to the joint pipes and throttle
lin kaae.
FUEL JOINT PIPES
CARBURETOR ASSEMBLY
Coat new 0-rings with oil and install them on the
fuel joint pipes.
Joint the right and left carburetors together
FUEL JOINT PiPES
LOCK WASHER
TABS
Install the front and rear stay plates and tighten the
screws.
TORQUE: 2.8-4.2 N = m (0.28-0.42 kg-m,
2 - 2 3 ft-lb)
Install the throttle joint lock washer and bolt.
Tighten the joint bolt and bend the lock washer tabs
up against the bolt head.
JOINT BOLT
B a t e of
Issue:
December,
"1882
O
FIBNESA MOTOR
CO.,
LTD.