Temperature Sensor Inspection; Thermostat Inspection - Honda CX650C 1983 Shop Manual

HONDA
6X650C
COOLING SYSTEM
TEMPERATURE SENSOR INSPECTION
Suspend the sensor in oil and measure the resistance
through the sensor
as
the oil heats.
Do not let the sensor or thermometer touch the pan
or false readings will result.
p
.
-
- p -
. -
/
w a r gloves
and
eye prokciiion.
1
. -
p - . . p . -
be used as the heated liquid
operation above 1 0 0 ' ~ ( 2 1 2 ' ~ ) .
THERMOSTAT INSPECTION
Inspect the thermostat visually for damage.
Suspend the thermostat in hot water to check its
operation.
Do not let the thermostat or thermometer touch the
pan or false readings will result.
Technical Data
Valve lift
8 mm (0.31 in) minimum
NOTE
B)
Replace the thermostat if the valve stays
open a t room temperature, or if i t responds
a t
temperatures other than those specified.
*
Valve lift must be checked by applying
heat for five minutes.
THERMOMETER
1
THERMOSTAT
E
INSTALLATION
Insert the thermostat into the thermostat housing.
Install
a
new 0-ring on the thermostat case and
attach the thermostat cover and bracket.
Install the temperature unit.
. . . . . .
- - . . . . . . - - . p p
that the 0-rings are not dislodged.
Make sure the thermostat is installed in the
correct direction.
THERMOSTAT
THE R MOSTAT
THERMOSTAT
l
PIPE
/
Date of Issue: December,
2 982
O
HONPP, MOTOR
CO.,
LTD.