Honda CX650C 1983 Shop Manual page 193

FRONT WHEE LlSUSPENSBON
Insert the
pin
on the bottom half of each switch
assembly into the hole in
t t i e
handlebar.
Tighten the forward screws first, then tighten the
rear screws.
Make sure the wire harness is not pinched
between the switch assembly and the hand-
Install the front brake master cylinder with the
"UP" mark on the holder facing up. Align the end
of the holder with the handlebar punch mark.
Tighten the upper bolt first, then the lower bolt.
Connect the brake light switch wires.
Connect the choke cabie to the choke lever
PiNS
"UP"
MARK
PUNCH
GARK
CHOKE LEVER
Date of Issue:
December,
1982
O
HONDA MOTOR CO., LTD.